Trodat 4612 12mm Diameter Loyalty Stamp
Trodat 4612 12mm Diameter Loyalty Stamp
The Trodat 4612 is a small, self-inking rubber stamp. It is small enough to fit in your pocket, like a lipgloss tube.
To use the stamp, you simply pick it up, pull off the cap, place it over the area you want to stamp, and press down firmly. The stamp has a viewing area so you can accurately locate the spot to mark. Once you have pressed down, release the pressure and the stamp will pop back up. Finally, replace the cap and put the stamp back in your pocket.
The maximum image area for the stamp is 11.5mm in diameter. This is a small area, so it is best used for simple text or logos. Complex logos or large amounts of text will not fit in the space.
The Trodat 4612 stamp has a replaceable ink pad that can last for hundreds to a few thousand stampings. The ink pad can also be topped up with a drop or two of Trodat 7011 ink if needed.
This stamp is commonly used for loyalty cards, teacher's marking, and quality assurance work. It is important to note that the standard water-based ink will smudge or smear off of glossy surfaces. This stamp is also not suitable for non-porous surfaces.
If you have a glossy surface it is recommend you order a dry pad and a bottle of Noris 191 Ink that is suitable for this type of surface (you will need to allow 20-40 seconds for it to dry)
Square models of the 12mm loyalty stamps are also available - Trodat 4921
Note – this stamp is smaller than your thumb nail. Complex logos will not work. Keep it super simple.
Do you have a size comparison chart so I can decide what stamp is best for me?
We sure do, click here to download a pdf of our most common stamps to see how they each compare against each other. If you need help at any time deciding please do not hesitate to reach out.
I want to duplicate a stamp I already have, is this possible?
If you have a rubber stamp that you need another one of, we can help you. If you bought your current stamp from us, we may already have it on file. Just let us know your name or order number and we can find it.
If you bought your rubber stamp from a store like Warehouse Stationery, Office Max, or Office Products Depot, we can also make you another one. Just tell us the model number and stamp it on some paper. Then, scan the stamped paper and send us the PDF file. We can import the PDF file and trace over it to make a new stamp that is exactly the same. If you need to make any changes to the stamp, such as your address, we can easily do that.
I want to reuse an existing stamp but replace the rubber wording
Did you know that you can also change the rubber die on your stamp? This means that you don't have to buy a new stamp if the body of the stamp is still working fine. To do this, just type Rubber Die Only into the search bar at the top of the page. This product will allow you to choose the size you need and enter the details required. Here is a link to instructions on how to change the rubber die in your current stamp body.
I would like to see a proof before you make the stamp, is that possible?
Yes of course, if you have selected it we will always send you a proof of your stamp so we're both happy with the formatting before we send it to print.
What font do I use?
We have a selection of fonts that are well-tested and suitable for our self inking stamps
- Most common fonts are Calibri or Arial. Calibri is slightly less formal. Both work really well in stamps.
- Arial is a longer text and if you have a lot of characters on one row it may prove to be too long for some stamps.
- To make it shorter we can change to Arial Narrow which saves alot of space.
- Comic Sans is quite casual with a handwritten look
- Raleway is modern & chunky that works well as a clothing stamp.
- Courier is an old-fashioned but nostalgic typewriter-looking font.
- Or you can choose your own and we'll advise if it's possible and will work to give you a clean/clear impression.
What are the differences between self-inking, traditional handheld stamps and pre-inked stamps?
Self-inking stamps are all-in-one stamps that have a built-in ink pad. They are clean, fast, and reliable, and can be easily refilled. The ink pad is either refillable or replaceable.
Traditional handheld stamps are based on the classic design of a wooden mount, handle, and text plate. They require a separate ink pad.
Pre-inked stamps, also known as "flash stamps," are modern stamps that produce high-quality impressions. They work by having a porous gel-like rubber die that allows ink to flow through the die before an impression is made. The ink is stored in a reservoir in the stamp, and each stamp can produce up to 500 impressions before the ink needs to be refilled. These stamps do not require an ink pad. For best results, they should be pressed gently rather than stamped quickly.
Here is a table summarizing the key differences between the three types of stamps:
| Feature | Self-inking stamps | Traditional handheld stamps | Pre-inked stamps |
|---|---|---|---|
| Ink pad | Built-in | Requires separate ink pad | Built-in |
| Refillable | Yes | No | Yes |
| Replaceable | Yes | No | No |
| Impression quality | Good | Good | Excellent |
| Number of impressions before refilling | 10,000-20,000 | 500-1,000 | 500 |
| Recommended use | General use | Detailed work | High-quality work |
What types of Ink could I use?
Endorsing ink is a water based ink which is ideal for everyday stamping onto paper. This ink has also been tested to be “skin-safe” so you can feel free to use any of the standard stamps on someone’s hand or skin.
Textile Ink is specially designed to be used on clothes and after a few hours of drying this ink is machine washable. The most common self-inking stamp for textile ink is our Trodat 4911 found here.
Quick Drying Inks are solvent based inks that dry more quickly than standard water based inks. Stamps and More uses the Noris range of stamping inks for quick drying inks. This type of ink is required when stamping onto plastic, wax coated, or grease proof or other non-matte surfaces.
UV Inks are a popular request. UV inks can be provided in the format required for stamping onto human skin or for stamping onto areas that require rapid drying characteristics. Note: this ink may not be available for all stamp sizes
Shipping: We use the most efficient shipping methods available to get your orders to you as quickly as possible. As we believe that everyone should have access to the same products, regardless of where you live, we don't charge extra for rural delivery.
We offer free shipping for orders over $100. This way, you can save money on shipping even if you're ordering a large number of items.
Returns: We want you to be 100% satisfied with your purchase.
We offer returns for faulty items within 14 days of purchase. If you receive an item that is faulty, please contact us immediately and we will arrange for a replacement or refund.
Personalised and Made-to-Order Items:
We are unable to accept returns for personalised and made-to-order items. This is because these items are created specifically for you and cannot be resold.
If you are unsure whether an item is eligible for return, please contact us for clarification.
We hope these measures help to keep our shipping costs low and make it easier for you to shop with us. Thank you for your support of our New Zealand business!